Sandstrom S200DT10, Инструкция по эксплуатации

Страница: 10 / 56

G
etting
Star
ted
G
etting
ro
Kno
w
Your
Phone
U
sing
the
Phone
Handset
Settings
Base
Settings
GB-10
DATE AND TIME
Providing you have subscribed to your network’s Caller Display service, the date and time is set automati-
cally for all handsets when you receive your first call.
The date and time is recorded with each answer machine message you receive.
If you do not have a Caller Display service you can set the date and time manually.
Set date and time manually:
1� Press the
Menu
button and scroll the or button to
Clock & Alarm
then press the
Select
button�
2�
Date & Time
is highlighted� Press the
Select
button�
3� Enter the date using the format DD/MM/YY e�g� 01 09 08 for 1st September 2008� Enter the time in 12 or
24 hour time format� Press the
Save
button� To change the Time Format�
4� Press the or
Back
button until you return to standby
HANDSET RANGE
The unit has a range of 300 metres outdoors when there is a clear line of sight between the base and
handset� Any obstruction between the base and handset will reduce the range significantly� With the
base indoors and handset either indoors or outdoors, the range will normally be up to 50 metres� Thick
stone walls can severely affect the range�
SIGNAL STRENGTH
• The icon on your handset indicates when you are in range� When out from range from the base, the
screen shows
Searching���
and the flashes�
• During a call, if the handset goes out of range the handset will emit an out of range warning tone�
• If you are on a call, the line will hang up if the handset moves out of range from the base� Move back
within in range� The handset will automatically reconnect to the base�
IMPORTANT
The answer machine must be plugged into the mains power at all times. Do not connect the telephone line cord into the wall
socket until the handset is fully charged. Only use the power and telephone cables supplied with this product.
S100DT10_100722.indd 10 7/22/10 10:35 AM