41
Installing the oven
• Veneer or other finish of the furniture the appliance is being built into should be processed with
heat-resistant glue (100°C); otherwise, high temperatures may cause them to deform.
• Before installing the appliance, remove the back wall from the piece of kitchen furniture the
appliance is being built into, along the entire length of the cutout.
• The installation cutout should be dimensioned as indicated in the figure.
• Level the piece of furniture the appliance was built into with a spirit level.
• The piece of kitchen furniture the appliance is built into must be secured against movement, e.g.
attached to the adjacent pieces of kitchen furniture.
• Push the oven into the kitchen furniture cavity far enough that the plastic guides for the screws that
are inserted in the oven frame holes are placed against the kitchen cabinet side walls.
• When attaching the appliance, don’t over
tighten the screws as this may damage the
furniture or the ovens enamel coating.
597
588
Glass
550
545
583-585
578
547
565
550
578
588
Glass
597
547
565
545
600
560
min 550
min 550
20
560
STMFOB13/W13_IB.indd 41
04/06/2013 18:12