Sandstorm S6VDAB12, Инструкция по эксплуатации

Страница: 10 / 16

10
1. To activate auto scan, fi rst press the MENU button
to enter the Tune Select Menu. Then turn the
SCROLL dial to select “Autoscan”, and then press
the OK dial to confi rm. The display will show
“Scanning …” and a progressing slide bar. This may
take a few minutes, depending on the number of
stations found.
2. All the stations that have been found will be
stored automatically. To explore the found
stations, turn the SCROLL dial. Press the OK dial
to confi rm.
DAB Auto Scan
The auto scan will search for the all DAB Band III channels. After the scan has fi nished, the
fi rst alphanumerically found station will be automatically selected.
DAB Operation
If the unit is connected to the mains power and then
switched on from standby for the fi rst time, the unit will
automatically enter DAB mode and start automatically
scanning. During the scan the LCD display will show
“Scanning…” together with a slide bar that indicates
the progress of the scan and the amount of stations
that have been found so far.
Once the scan has fi nished, the unit will select the fi rst
alphanumerically found station. Explore the found
stations by turning the SCROLL dial. When you fi nd a
station that you would like to listen to, press the OK
dial.
Full auto scan will not replace the DAB stations in the unit’s memory. If you
want to delete all the previously scanned stations, a system reset is required.
If no stations are found after auto scan, the radio will enter the Tune
Select Menu, you can now turn the SCROLL dial then press OK dial to
select “Manual tune” or “Autoscan” for stations.