S&S Research VM4HD, Инструкция по установке и эксплуатации

Страница: 5 / 11

VM4HD will output composite video.
4. Composite Output
The composite output of the VM4HD is capable of sending SD video
signals only. When composite output is chosen, any of the three
video output connectors may be used to output a composite video
signal.
Connecting an external video source
The VM4HD connects to an external video source using the video
input, and stereo audio input connectors. If no presentation is
available, or the current presentation is paused, the external video
source will be passed through to the display.
Connecting to a network
If network operation is desired, the VM4HD must be connected to
the same local area network (LAN) as the computer running the
supplied VM Composer software. If you are unsure how to
accomplish this, contact your distributor or installer for assistance.
Using flash memory
The VM4HD stores presentations in external memory connected via
the SD card slot, or the front or rear USB connectors. Note – the
front and rear panel USB connectors may not be used
simultaneously.
The VM4HD must have a memory device connected in order to play
or download a presentation. Presentations can be pre-programmed
onto a memory device, or downloaded to the memory device over a
local area network (LAN) using the supplied VM Composer
software.
5