S&S Research VM4HD, Инструкция по установке и эксплуатации

Страница: 3 / 11

•
Use only the power source marked on the unit.
•
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other, a grounding type plug has two
blades and a third grounding prong. The wide blade or third
prong are provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement
of the outdated obsolete outlet.
•
For safety purposes this unit is equipped with a grounded
power receptacle and cord. Do not defeat this safety feature
by tampering with the unit or plug.
•
Do not place objects on or crush the power cord. Install the
unit where no one can step or trip on the cord.
•
Never push any objects through slots in this unit. This may
result in the risk of fire or electrical shock. Never spill any
liquid on the unit.
•
To reduce the risk of electrical shock, do not disassemble the
unit. Take the unit to your dealer for service when service is
required. Opening or removing the cover may expose you to
dangerous voltages or other risks. Incorrect reassembly can
cause electrical shock when the unit is subsequently used.
•
Unplug the unit and power cord from power outlets and refer
servicing to an authorized dealer when any of the following
occur.
A. When power cord is damaged or frayed.
B. If liquid has been spilled into the unit.
C. If the unit has been exposed to rain or water.
D. If unit does not work properly by following the
operating instructions correctly.
E. If the unit has been dropped or physically
damaged.
F. If the unit exhibits a distinct change in
performance.
SAVE THESE INSTRUCTIONS
CAUTION:
•
Only connect power after unit is mounted and all connections
have been made.
WARNING:
•
To prevent the risk of fire or electrical shock, do not expose
this product to rain or any type of moisture.
•
Unplug the unit from power if it emits smoke, an abnormal
smell or makes unusual noise. These conditions can cause
fire or electrical shock. Confirm that smoke has stopped and
contact an authorized dealer.
For best performance
•
Operating temperature: 32° to 95° F (0° to 35° C)
•
Non-operating temperature: -4° to 113° F (-20° to 45° C)
•
Relative humidity: 5% to 95% non-condensing
•
Keep the unit away from electrical noise generating devices,
such as fluorescent lamps and motors.
•
The unit should be kept free from dust, high temperature and
vibration.
•
The unit should not be operated in direct sunlight.
•
Do not place any objects on top of unit.
•
The unit should be kept away from heat sources such as
heaters, stoves and heat making electronic devices.
•
Do not install in damp basement or near equipment that
creates humidity.
Routine care
•
Wipe the outer surface with a soft cloth. Do not use solvents,
thinners or any liquid. Do not use aerosols.
3