S&P VFTM Series, Руководство пользователя

Страница: 18 / 56

18 18
ENGLISH
1. RECOMMENDATIONS
You have purchased a frequency inverter designed specifically by Soler & Palau to perform the functions described in
the table of contents.
Before you install and start up this product, please read this instruction book carefully because it contains
important information for your safety and the safety of users during installation, use and maintenance. Once
installation is complete, please pass the instruction book on to the end user.
Please check that the equipment is in perfect condition when you unpack it since any factory defect is covered
under the S&P guarantee. Please also check that the equipment is the one that you have ordered and that the
information on the instruction plate meets your requirements.
Not every fan can be adjusted using frequency inverters.
Make sure that the fan you want to regulate is compatible with the frequency inverter you have purchased.
Transport and handling
-
The equipment packaging has been designed to withstand normal transport conditions. The equipment must not
be transported without its original packaging as it could become damaged.
- The product must be stored in its original packaging and in a dry and clean place until it is installed. Do not
accept any equipment that is not supplied in its original packaging or that shows signs of having been tampered
with.
- Prevent the packaging from falling and being knocked and do not place heavy loads on it.
Important for your safety and the safety of users
- The product must be installed by a qualified specialist.
- Ensure that installation complies with mechanical and electrical regulations in each country.
- Once commissioned, the equipment must comply with the following Directives:
x
Low Voltage Directive 2006/95/CE
x
European Machinery Directive 2006/42/CE
x
Electromagnetic Compatibility Directive 2004/108/CE
- Do not use this equipment in explosive or corrosive atmospheres.
Safety during Installation
- Before you handle this equipment, ensure it is disconnected from the mains power supply.
- Check that the mains voltage and frequency are the same as specified on the name plate.
- Follow the wiring diagram to make the electrical connections.
- Check that the earthing, if any, is correct and that the thermal and surge protection has been connected and are
within the relevant limits.
Maintenance
- Before you handle the equipment, ensure it is disconnected from the mains and that no one can switch it on
during the maintenance procedure.
-
During any maintenance and repair work, safety regulations in force in each country must be observed.
Recycling
- EU regulations and our commitment to future generations oblige us to recycle used materials. Please remember
to dispose of all unwanted packaging materials at the appropriate recycling points, and to drop obsolete
equipment at the nearest waste management point.