S&P HTD-130 MR, Руководство по установке и эксплуатации

Страница: 16 / 58

14
UNpACKING INSTRUCTIONS
Before assembling the ceiling fan, remove all parts from the shipping carton and check them against
the parts listed below (fig. 1 ) :
A- Hanging plate
B- Upper Canopy
C- Support downrod
D- Cotter pin safety dowel
E- Cotter pin
F- Motor
G- Switch housing assembly
H- Switch housing
I- Washers
J- Screws
K- Blade brackets
L- Blades
M- Washers
N- Screws
O- Washers
P- Screws
Q- Screws
R- Washers
S- Wall plugs
T- Blade fixing bracket
Balancing kit
Instructions Manual
INSTALLATION INSTRUCTION
FITTING THE FAN TO THE CEILING
Important: To avoid the possibility of accidents cause by the fan, which could imply legal responsibilities
for the installer, compliance with each of the following instructions is essential.
Ensure that the distance between the lowest point of the fan, once installed, and the floor is at least
2.3 metres.
Check that the means of fitting the fan to the ceiling is capable of supporting the weight of the fan
when in operation. (Minimum25Kg.).
Fitting to a concrete ceiling
To ensure correct installation, drill four holes of the same diameter as the wall plugs (S) in the concrete
ceiling. Insert the plugs supplied and fix the support plate (A) using the four screws (P) and washers
(O) provided. (Fig.2).
MODEL A B C D E F G H I J K L M N O P Q R S T LAMP
HTL-130 1G 1 1 1 1 1 1 1 2 10 10 5 5 - 15 4 4 4 4 4 5 KIT 1
HTL-130 4F 1 1 1 1 1 1 1 2 10 10 5 5 15 15 4 4 4 4 4 - KIT 4
HTD-130MR 1 1 1 1 1 1 1 1 8 8 4 4 12 12 4 4 4 4 4 - -
HTD-130 B 1 1 1 1 1 1 1 1 8 8 4 4 12 12 4 4 4 4 4 - -