ENGLISH
41
6.6.2. Operation PI PRESSURE/COP mode
In section 5 we have described that the fan comes from factory ready to work in constant pressure mode. However, it is also
possible to connect an external pressure transducer (0-10V or 4-20mA) that should be connected to J5 or J6 terminals.
Operation PI PRESSURE/COP mode
After selecting the operating PI PRESSURE/COP mode, you can confi gure following parameters:
MIN-OUTPUT
< 20% OK
Press
or
to manually modify the minimum
output parameter to the motor
MAX-OUTPUT
< 100% OK
Press
or
to manually modify the maximum
output parameter to the motor
SETUP LEVEL 2?
< NO SI
Access to advanced configuration parameters
ENTER PASSWORD:
1 1 1 OK
Enter the password
Default: 1 1 1
CHANGE PASSWORD
SI
NO
It is possible to assign a new password to your device
(channel)
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
