Sanding STS-752RC, Руководство пользователя

Страница: 6 / 152

5
PRECAUTIONS
1. Do not collimate the objective lens directly to the sun without a filter.
2. Do not store the instrument in high and low temperature to avoid the sudden
or great change of temperature.
3. When the instrument is not in use, place it in the case and avoid shock, dust
and humidity.
4. If the temperature in the work site is greatly different from that in the store
place, before operation you should leave the instrument in the case with the
cover opened until the temperature of the instrument get similar to the
surrounding temperature.
5. If the instrument will not be used for a long time, you should remove the
battery. And the battery should be recharged once a month.
6. During transportation, the instrument should be placed in the carrying case, it
is recommended that cushioned material should be used around the case for
support.
7. To meet the requirement of less vibration and better accuracy, the instrument
should be mounted on a wooden tripod rather than an aluminum tripod.
8. Clean exposed optical parts with degreased cotton or lens tissue only!
9. Clean the instrument surface with a woolen cloth. If it gets wet, dry it
immediately.
10. Before working, check the power, functions and indications of the instrument
as well as its initial settings and correction parameters.
11. Unless the user is a maintenance specialist, do not attempt to disassemble
the instrument by yourself even if you find the instrument abnormal.
12. Do not sight the eyes when Total Station STS-750RC Series is in work and
emits visible laser.
SAFETY GUIDE
Internal EDM (Visible Laser)
Warning :
The total station is equipped with an EDM of a laser grade of 3R/
Ⅲ
a. It is verified
by the following labels.
On the vertical tangent screw sticks an indication label “CLASS III LASER
PRODUCT”. Another same label is on the opposite side.
This product is classified as Class 3R laser product, which accords to the
following standards.
IEC60825-
1:2001 “SAFETY OF LASER PRODUCTS”.
Class 3R/
Ⅲ
a laser product: It is harmful to observe the laser beam continuously.
User should avoid sighting the laser at the eyes. It can reach 5 times the emitting
limit of Class2/II with a wavelength of 400mm-700mm.