1.0 Safety Instructions Continued
Reduce the Risk of Fire, Electric Shock or Injury
.
• DO NOT pick up anything that is burning or smoking such as cigarettes, matches or
hot ashes.
• DO NOT use the machine to pick up flammable or combustible liquids such as
gasoline or use in areas where they may be present.
• DO NOT use where oxygen or anesthetics are used.
• DO NOT put objects into openings or use with any openings blocked. Keep free
of dust, lint, hair and anything that may reduce air flow. Keep hair, loose clothing,
fingers, and all body parts away from openings and moving parts to ensure safe
operation.
• DO NOT use if any hoses or nozzles are damaged, cut or punctured.
• DO NOT expose to rain or use on wet surfaces, to avoid electric shock. Store indoors
.
• DO NOT leave machine outdoors, in extreme heat or cold. Harsh weather elements
will damage components and void warranty.
• DO NOT lubricate the motor. If the motor is lubricated, this will VOID your warranty.
2.0 Grounding Instructions
DANGER:
IMPROPER GROUNDING METHOD CAN RESULT IN A RISK OF
ELECTRIC SHOCK!
Electrical equipment must be grounded. Improper connection of the equipment grounding
conductor can result in a risk of electric shock. If the equipment should malfunction or
breakdown, grounding provides a path of least resistance for electrical current to reduce
the risk of electric shock.
This vacuum is equipped with a cord containing a grounding conductor and grounding
plug. The plug must be inserted into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
Check with a qualified electrician or service person if you are in doubt as to whether the
outlet is properly grounded. DO NOT modify the plug provided with the equipment. If it
will not fit into the outlet, have a proper outlet installed by a qualified electrician.
If repair or replacement of the cord or plug is necessary, DO NOT connect the grounded
wire to a flat bed terminal. The wire with insulation having an outer surface that is green
with or without yellow stripes is the grounding wire.
NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian
Electrical Code.
8.0 Trouble Shooting Guide
CAUTION:
Always disconnect the power cord before servicing equipment.
WARNING:
Never operate this flood pumper when the equipment is not
performing as expected or when any part is visibly damaged. Repairs should
only be performed by an authorized service center. Failure to do so will VOID
warranty.
System Problem Possible Cause
Remedy
Vacuum
System
No Vacuum
/ Weak
Vacuum
1.
2.
Float Shut-Off Tank Screen Dirty
3.
Float Ball Stuck
4.
Damaged or Loose Vacuum Hose
5.
Dump Valve Open
6.
Access Lid not Sealed
7.
Vacuum Hose Clogged
8.
Air Intake Grid Clogged
9.
Leak in Recovery Tank
1.
2.
Clean the Screen with Water
3.
Tap Float to Unstick then Clean
4.
Attach or Replace
5.
Close Valve
6.
Replace Gasket
7.
Clear Debris
8.
Clean
9.
Clean and Dry Area, Patch with Silicone
Electrical
System
Unit will not
Turn On
1.
Extension Cord not Plugged In
2.
Switch not in the “On” Position
3.
Building Circuit Overloaded
4.
Wiring Connections Loose
1.
Check if Machine and Cord are Plugged In
2.
Check Switches, Replace if Necessary
3.
Reset Circuit
4.
Unplug Machine and Check for Loose
Wires
Burning
Smell
1.
Vacuum Motor Hung Up
2.
Pump Motor Hung Up
3.
Debris in Vac Motor
1.
Replace Vacuum Motor
2.
Replace Pump
3.
Contact an Authorized Service Center
Pump
System
Pump is not
Running
Properly
1.
No Power to the Pump
2.
Propellor in Pump is not Operating
3.
Jets on Wand are Clogged
4.
In-Line Water Filter is Clogged
5.
Kinked or Loose Hose
6.
Pump Failed
7.
Hoses not Attached Poperly
1.
Check the Electrical System
2.
Needs Replaced - Contact an Authorized
Service Center
3.
Clean In-Line Filter
4.
Clear Debris
5.
Check and Replace Hose if Necessary
6.
Replace Pump
7.
Push Hoses into Place
24-Gallon Sniper Flood Pumper (11)
(6) 24-Gallon Sniper Flood Pumper
https://harrissupplyind.com - To Order Parts Call 608-268-8080
