o
Perating
i
nstructions
Biometric Keypad
When you decide which of the three options to utilize, navigate
to the TD override option in the setup menu (option 9). Once you
program a TDO option, you will not be able to change it.
As you can see from the next set of menus, you have the option
of setting the type of TDO (none, single control, or dual control),
or setting the TDO code. Remember that the TDO mode must be
set before the master code is changed for the first time, and that
once programmed, the TDO mode cannot be changed.
If you select single user (option 1) or dual control (option 2), the
following screen will be displayed while the keypad communicates
with the lock.
If the lock alerts you that the TDO mode could not be set, it is
likely the TDO mode was previously set, and it cannot be changed
after it is set and the lock’s master code is changed.
➥
M
anagIng
L
ocK
c
odes
—a
ddIng
u
sers
Lock model 6120 will accept up to 8 user codes, in positions 2
through 9. Models 6123 and Z
02
will accept up to 6 user codes
in positions 2 through 7. New users can only be set up in empty
PIN positions. To overwrite an existing code, you will first have to
delete it.
© Copyright 2005, Sargent & Greenleaf
Page 9
