Instructions for the installer, maintenance
technician and final user
28
© SandenVendo Europe SpA
6.3 Replacing neon lamps
To replace a neon lamp, work as follows:
Open the door of the vending machine using the special key supplied (ref. Fig. 6.1).
Press the luminous green
LIGHT SWITCH
pushbutton to disconnect power to the neon
lamps: switch from position “1” to position “0”
CAUTION: AT THIS STAGE ONLY THE POWER CIRCUIT OF NEON LAMPS IS CUT OFF, THE
VENDING MACHINE IS STILL POWERED
By means of the inspections holes (ref. Fig. 6.2) take out the neon lamps to be
replaced by the two fastening clips
Disconnect the neon lamp from its wiring
Wire up the new neon lamp and fasten it to with the clip
Once you have replaced the neon lamp work as follows:
Press the luminous green
LIGHT SWITCH
pushbutton to switch on the neon lamps,
turn from position “0” to position “1”;
Re-close the door of the vending machine and make sure you lock it using the access
key supplied
FIG. 6.2 – INSPECTIONS HOLES
