Instructions for the installer, maintenance
technician and final user
17
© SandenVendo Europe SpA
3.6Connection to the power mains
SERVICE CORD INSTALLATION
CASE “A”
(WITH METAL GRILLE)
CASE “B”
(WITH PLASTIC GRILLE)
FIG. 3.3
CAUTION: BEFORE DOING THE ELECTRICAL CONNECTION MAKE THE
FOLLOWING CHECKS
Make sure
that the particulars of the power mains (tension and frequency) are the
same as those indicated on the machine’s rating plate: this vending machine must
be connected to a 230 V , 50 Hz power mains, each voltage below 207 V or over
253 V can causes failure.
Make sure
that the supply outlet is grounded and that, after making the
connection, the entire appliance is ground connected.
Make sure
that the appliance is positioned so that the plug connecting it to the
power mains can be easily accessed after installation.
Make sure
that the neutral wire is blue; otherwise, you must invert the poles.
CAUTION:
should you find any anomalies with the supply cable or should it
be damaged, it must be replaced. For the safety of personnel and to prevent
all risks of damages to the machine never replace the supply cable, contact
the manufacturer or the technical assistance service.
CAUTION: NEVER USE EXTENSION LEADS
You may now connect the machine to the power mains, the neon advertising panel and all
the signal lamps of the empty columns should light up and the cooling system should start.
