SD7H15 Type C Service Manual
Prepared July 1999 – Application Engineering
8
Service Operations – Clutch
3.3 Field Coil Assembly Removal
1.
Remove lead wire clamp screw with Phillips screwdriver so that coil
wires are free. Take care not to round off retaining screw head. (Fig.6)
2.
Remove coil retaining snap ring using snap ring pliers.(Fig.7)
3.
Remove the field coil assembly.
4.
Remove the shims from the shaft. Use a pointed tool and a small
screwdriver to prevent the shims from binding on the shaft.(Fig.8)
Fig.6 Remove clamp screw
Fig.7 Remove snap ring
Fig.8 Remove shims
