Sanden GS3-45HPA-US, Руководство по установке

Страница: 22 / 36

Sanden Heat Pump – Installation Manual
Page 22 of 36
※
Example setting
To bypass the Block Out Time, simply press the UP key to access the next parameter in
the Commissioning menu
Error History
Enter into Commissioning Mode
First option is the Heat Setting
Second option is Temperature Setting
Third option is Block Out Time –
Press the UP Key to access Error History then Press Enter to access
This records all errors that have occurred on the system, this can be used for
troubleshooting after an error code has been cleared by cycling the power to the unit.
The most recent error code is displayed first, previous error codes can be seen by
pressing the DOWN key
To bypass the Error History simply press the UP key to access the next parameter in the
Commissioning menu
Parameter Display
Enter into Commissioning Mode
First option is the Heat Setting
Second option is Temperature Setting
Third option is Block Out Time
Fourth option is Error history –
Press the UP Key to access Parameter Display then Press Enter to access
This displays all of the values currently measured by the unit’s temperature sensors, this
can be used for troubleshooting and general unit performance questions.
All values will be in °C and will displayed 10 x larger than the actual value e.g. 58°C will be
displayed as 0580 (°F conversion x 1.8 +32)
When first entering this mode the display will cycle between no00 and the actual data
value ****, to access the other data points use the DOWN key
Bo Setting For Example “ 13 01 ”
AM
○
PM
○
AM
○
13
01
Unit will not Run