S&C Instruction Sheet 1045M-510
5
DANGER
The S&C 6801M Automatic Switch Operator line voltage input range is 93
to 276 Vac. Failure to observe the precautions below will result in serious
personal injury or death.
Some of these precautions may differ from your company’s operating procedures
and rules. Where a discrepancy exists, follow your company’s operating procedures
and rules.
1.
QUALIFIED PERSONS. Access to the 6801M
Automatic Switch Operator must be restricted only
to Qualified Persons. See “Qualified Persons” on
page 2.
2.
SAFETY PROCEDURES. Always follow safe
operating procedures and rules. Always maintain
proper clearance from energized components.
3.
PERSONAL PROTECTIVE EQUIPMENT. Always
use suitable protective equipment such as rubber
gloves, rubber mats, hard hats, safety glasses, and
flash clothing, in accordance with safe operating
procedures and rules.
4.
SAFETY LABELS. Do not remove or obscure any of
the “DANGER,” “WARNING,” “CAUTION,” or
“NOTICE” labels.
5.
MAINTAIN PROPER CLEARANCE. Always maintain
proper clearance from energized components.
Safety Precautions
