2
S&C Instruction Sheet 1045M-510
Introduction
Qualified Persons
WARNING
Only Qualified Persons who are knowledgeable in the installation, operation, and
maintenance of overhead and underground electric distribution equipment, along
with all associated hazards, may install, operate, and maintain the equipment
covered by this publication. A Qualified Person is someone who is trained and
competent in:
• The skills and techniques necessary to distinguish exposed live parts from nonlive
parts of electrical equipment
• The skills and techniques necessary to determine the proper approach distances
corresponding to the voltages to which the Qualified Person will be exposed
• The proper use of special precautionary techniques, personal protective
equipment, insulated and shielding materials, and insulated tools for working on
or near exposed energized parts of electrical equipment
These instructions are intended ONLY for such Qualified Persons. They are
not intended to be a substitute for adequate training and experience in safety
procedures for this type of equipment.
Read this
Instruction Sheet
NOTICE
Read this instruction sheet thoroughly and carefully before installing or
operating your S&C 6801M Automatic Switch Operator. Familiarize yourself with
the Safety Information on page 4 and Safety Precautions on page 5. The latest
version of this publication is available online in PDF format at
sandc.com/en/
support/product-literature/.
Retain this
Instruction Sheet
This instruction sheet is a permanent part of your S&C 6801M Automatic Switch Operator.
Designate a location where you can easily retrieve and refer to this publication.
Proper Application
WARNING
The equipment in this publication must be selected for a specific application. The
application must be within the ratings furnished for the selected equipment.
Special Warranty
Provisions
The standard warranty contained in S&C’s standard conditions of sale, as set forth in
Price Sheets 150 and 181, applies to the S&C 6801M Automatic Switch Operator, except
that the first paragraph of the said warranty is replaced by the following:
(1)
General:
The seller warrants to the immediate purchaser or end user for a period of
10 years from the date of shipment that the equipment delivered will be of the kind
and quality specified in the contract description and will be free of defects of work-
manship and material. Should any failure to conform to this warranty appear under
proper and normal use within 10 years after the date of shipment, the seller agrees,
upon prompt notification thereof and confirmation that the equipment has been
stored, installed, operated, inspected, and maintained in accordance with the recom-
mendations of the seller and standard industry practice, to correct the nonconfor-
mity either by repairing any damaged or defective parts of the equipment or (at the
seller’s option) by shipment of necessary replacement parts. The seller’s warranty
does not apply to any equipment that has been disassembled, repaired, or altered by
anyone other than the seller. This limited warranty is granted only to the immediate
purchaser or, if the equipment is purchased by a third party for installation in third-
party equipment, the end user of the equipment. The seller’s duty to perform under
any warranty may be delayed, at the seller’s sole option, until the seller has been
paid in full for all goods purchased by the immediate purchaser. No such delay shall
extend the warranty period.