3
Connecting the headset
Connect the headset to a device as follows:
1. Ensure that the headset is switched off.
2. Press and hold button
(1)
for ten sec-
onds until the LEDs
(3)
flash red and
blue alternately.
3. The headset can now be paired with the
desired device such as a mobile phone
or computer. The pairing code for the
headset is
1234
(if necessary, refer to
the instructions for the device to find
out how to do this).
4. Activate the headset by pressing button
(1)
.
Using the headset with a mobile
phone
If you want to use the headset with your
mobile phone, do as follows:
1. Pair the headset with the telephone (see
previous section).
2. Switch on the headset by pressing and
holding button
(1)
for three to five
seconds.
3. Activate the use of the headset on the
mobile phone if required (if necessary,
refer to the instructions for the tele-
phone for more information).
Calls can be made as follows:
•
To make a voice call:
Press button
(1)
and wait until you hear a beep. Record
the voice call command. End the call by
pressing button
(1)
.
•
To dial the number:
Dial the number
on the telephone as you would for a
normal call. The headset is automati-
cally activated when the call is made.
End the call by pressing button
(1)
.
•
To redial:
Press and hold button
(2)
for three seconds. The last-dialled num-
ber is then called. End the call by press-
ing button
(1)
.
NB:
For voice calls, the mobile phone must
support this function. If necessary, refer to
the instructions for the telephone for more
information.
Call management:
•
To answer an incoming call:
Press
button
(1)
.
•
To reject an incoming call:
Press and
hold button
(2)
for three seconds.
•
To switch off the microphone:
During
a call, press buttons
(1)
and
(2)
simul-
taneously. To switch on the microphone
again, repeat the procedure.
•
To transfer a call from the headset
to the mobile phone:
Press and hold
button
(1)
for three seconds. To trans-
fer a call back to the headset, press
button
(1)
.
ENG
L
IS
H
