S&B Filters 75-5089, Руководство по установке

Страница: 10 / 16

Install the Straight Coupler (K) with Hose Clamps #60 (G) onto the straight side of the Intake Tube (Throttle Body) (J). Slide the
coupler up onto the intake tube as much as possible. This will help make the install easier.
24
Install the Intake Tube (Throttle Body) (J) into the Step Coupler (H). Slide the Straight Coupler (K) onto the Intake Tube (Filter) (L) to
connect the two intake tubes together. Make sure that both the step coupler and straight coupler are completely installed onto the
intake tubes up to the stop beads then tighten all hose clamps.
Tool Required:
8mm Socket/Wrench
25
Connect the vacuum line into the Quick Connect (F) . You
should hear the vacuum line snap when it locks onto the
quick connect.
26 27
Install the CCV hose into the Intake Tube (Filter) (L) and
Tighten and hose clamp.
Tool Required: 8mm Socket/Wrench
Stop Bead
Tighten
Stop Bead
Stop Bead
Tighten
9
INSTALLATION STEPS: