Sanav G-19B, Руководство пользователя

Страница: 17 / 34

17
4.3 Auto Report Interval Setup
Use this SMS message to set up the frequency for Auto Report function after predefining the cellular number(s) . If
you send the SMS according to E.g.3 seen below, you will have an Auto Report Message every 2 minutes. After 12
Auto Report messages are sent, G-19B will stop sending.
E.g.3
#Username,0000,3,002,12*
The table 4.3.1 is describing the meaning of each segment in the message above.
Text Keyed In SMS Description
# Start sign.
Username Default ID of G-19B.
0000 Default password.
If you have changed the password, please use the updated one.
3 Mode 3 is representing report interval setup.
002 Auto Report interval in minutes.
This parameter must be 3 digits. The minimum unit is 002 and maximum is
120 minutes.
For example, 002 means that an Auto Report message will be sent every 2
minutes.
To cancel Auto Report function, set the interval as “000 ”. The default setting
of auto report is also off.
12 Total number of SMS will be sent.
This parameter must be 2 digits.
For example, 12 means that only 12 Auto Report messages will be sent in total. After
that, G-19B will stop sending.
If you set up this value being “00” , the G-19B will stop Auto Report.
* End sign.
Table 4.3.1
The table 4.3.2 is showing each confirm message reply after setup.
Situation Message Reply
Setup Succeeds Username setup OK. G-19B auto-report.
Setup Fail Username setup fail.
G-19B is in Emergency Mode Username in emergency, auto-report not allowed.
Table 4.3.2