12
Chapter
3
General
Functions
After completing the procedures in
Chapter 2
(
page10
) and both red and blue LED keep the lights still, you
may try the following functions of G-19B.
The General Functions are described as following.
Polling (Requesting immediate response from G-19B)
There are 2 methods to obtain the immediate response from G-19B.
Method 1:
Dial the phone number of G-19B through your mobile phone, and then you will receive a respond message
within 20 seconds, depending on how busy the GSM network is.
Method 2:
When you are in overseas, you can send a command via SMS to the G-19B (see
Chapter 4.7
,
page22
). And then
you will receive a respond message.
Note1:
G-19B can accept any cellular phone call and reply SMS message to the one that is calling.
Note2:
Once the “Own Number Sending” function is deactivated in your cellular phone, G-19B will not
recognize the calling number so as to lose polling function.
Change User ID
and
Password
The default user ID and password of G-19B is “Username” and “0000” respectively. You can change them
according to your preference. Please refer to
Chapter 4.1
(
page 14
) and
Chapter 4.6
(
page21
) for more
information about how to change User ID and Password.
Predefine Cellular Number(s)
Before using the functions of
Auto Report
,
Emergency Alert
and
Park
, you need to predefine at least one and
maximum of 5 cellular numbers. Please refer to
Chapter 4.2
(
page15
) for more information of this setup.
Auto Report
G-19B can report SMS message only to the designate cellular phone. It is the first cellular number predefined in
G-19B. However, the default Auto Report function is off. To turn on Auto Report function, send the setup SMS
message to launch.
See chapter 4.3 for further information.
Содержание G-19B
Страница 30: ...30 Chapter 6 NMEA 0183 GPRMC Description ...
