Sanav G-19B, Руководство пользователя

Страница: 15 / 34

15
4.1 Changing ID
You can change the ID of G-19B by following the format below. No space is allowed in between the
characters. For example, if you send the SMS message shown in
E.g.1 to the G-19B, you will change
the ID from “Username” to “GPS00001”.
E.g.1
#Username,0000,1,GPS00001,GPS00001*
The table 4.1.1 is describing the meaning of each segment in the message above.
Text Keyed In SMS Description
# Start sign.
Username Default ID of G-19B.
0000 Default password.
If you have changed the password, please use the updated one.
1 Mode 1 is representing the ID setup
GPS00001 New ID defined by the owner.
At the maximum of 8 characters.
GPS00001 Confirm the new ID by keying it again. It must be exactly the same as the
new ID keyed previously.
* End sign.
Table 4.1.1
The table 4.1.2 is showing each confirm message reply after setup.
Situation Message Reply
Setup Succeeds GPS00001 setup OK. G-19B ID updated.
Setup Fail Username setup fail.
G-19B is in Emergency Mode Username in emergency, ID setup not allowed.
Table 4.1.2