Command Setup for SJ-205HAB
SJ-205HAB currently provides SMS command and COTA (TCP) command for remote setup. User can setup the
SJ-205HAB by following the instructions shown in following chapters via SMS/COTA. Key the specific SMS
message in your cellular phone and send it to the SIM number of SJ-205HAB. The setup messages are showed
in the following sections.
1: The default setting:
Default ID is “USERNAME”. Please read chapter
Change User Name
to desired ID.
Default password is “0000”. Please read chapter
Change Password
to change the password.
There is no number in the default contact. Please read chapter
Set up Phone Book List
to add the number.
Default setting of
Retrospective Location Mode
is deactivated. Please read chapter
Set up Retrospective
Location Mode by Time
to setup the regular Retrospective Location Mode.
Default setting of APN is only suitable for mobile network. Please read chapter
Set up APN for MOBILE
NETWORK Service
to change the APN.
Default setting of URL is
http://www.sanavtw.com/uploadM1.php.
Please read chapter
Set up URL
to
change the URL for http server setup.
Before doing any setup, please ensure the device is connected with the GSM network. The GSM LED must light
on. And please note the device is not in SOS/Panic mode.
2: Please note that all the characters which include #, * and comma (,) should be
HALFWIDTH
form.
3: Please be aware of the upper (capital)/lower cases when entering the SMS command.
4: While entering any SMS command, note that
NO SPACE
is allowed between the characters, comma and
signs in the SMS.
5: Any setup command must be started with a “#” sign and ended up with a “*” sign.
6: The comma (,) can be abbreviated if no further setup required for the command besides
Set up APN for LTE
Service.
Please refer to the examples of
Set up Retrospective Location Mode.
7: Add or not add the “+ “sign in front of the cellular phone number(s) are both acceptable, while the”+” sign
should precede the international call prefixes. The specified international call prefix is required if “+ “sign is not
added.
8: The device will update setting Only when the password, USERNAME and setup command are all correct.
If the command is not valid, a failure report is going to be sent to the user’s cell phone.
9: Some PREPAID PHONE CARD SIM modules do not enable or even support MOBILE NETWORK service. Please
consult with GSM carrier for further information.
11F., No.2, Sec. 4, Jhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.)
Tel: 886-2-22694456
｜
Fax: 886-2-22694451
｜
11
w
w
©
U
nic
tro
n
Te
ch
no
lo
gie
s
C
or
p.
A
ll
sp
ec
ific
at
io
ns
su
bje
ct
to
ch
an
ge
w
ith
ou
t
no
tic
e.
