- 2 -
The structure shown is an illustration.
Please use this structure for better understanding.
M A I N T E N A N C E
Do not use abrasive or chemical cleaners (including chlorine bleach) to clean faucets
as they may dull the luster and attack the chrome or special decorative finishes.
Use ONLY soap and water, then wipe dry with clean cloth or towel.
While cleaning the bathroom tile, the faucet should be protected from any splattering
of cleaner. Acids and cleaning fluids will discolor or remove chrome plating.
Care and Cleaning of Chrome and Special Finishes
IMPORTANT!
: Pipe chips, sand, stones and other solid found in new and
renovated plumbing can damage the cealing of the cartridge and
cause leaks to avoid damage,
DO NOT TURN ON SUPPLY VALVES until instructed below.
1. After installing and connecting your new faucet, turn on in the full cold position
(handle pointing to the right) and turn on the cold supply for 15 seconds.
2. Without closing the handle, turn to the full hot position (handle pointing to the
left) and turn on the hot supply for 15 seconds.
3. Close the handle, then using a towel unscrew the aerator from the end of the
spout and clean the aerator.
4. Using a towel replace the aerator and check the system for leaks.
- 7 -
TO CORRECT REVERSED HOT AND COLD POSITIONS :
1. Shut off both stop valves. Then, open faucet handles to relieve water pressure
that complete water shut-off has been accomplished.
2. Remove a lock cover and fastener clip in order.Then,remove the flex supply
tubes.
Re-connect each flex supply tubes into different supply stop valves.
(An excessive bending will cause leaking and damage to the tubes.)
Then,attach the fastener clip and lock cover after connecting the supply tubes.
3. Re-installing and connecting, turn on both cold and hot supply.
4. Turn on in the full position, make sure that the each positions keeps correct way
& make sure any water leakage.
P A R T S L I S T
F L U S H I N G I N S T R U C T I O N S
T R O U B L E S H O O T I N G
7
6
5
4
3
1
2
14
8
10
11
12
13
16
15
20
21
17
18
23
24
22
25
27
26
19
9
15
16
1. Cap
2. Screw
3. Lever Cover
4. Screw
5. Lever
6. Cover
7. Cartridge Holder
8. Ceramic Cartridge
9. Unit Body
10. Seat Packing
11. Rubber Packing
12. Metal Washer
13. Lock Nut
14. Flex Tube
15. Fastener Clip
16. Lock Cover
17. Fastener Adapter
18. Rubber Packing
19. Ring Packing
20. Screw
21. Spout
22. Shower Head
26. Net Filter
24. Aerator
25. O-Ring
23. Shower Body
27. Aerator Body
General Description
K 8 7 9 2 J - B W
28. Fastener Adapter (male)
28
