Chapter 4. Settings
53
■
<Bit Rate> : Selects the recording quality. Select either <32kbps> <64kbps> or <128kbps>
(the higher the number is, the larger the file size becomes).
■
<Delete File> : Search and delete files in the Navigation screen.
√
Page 54
■
<Resume> : Specifies the starting point to restart playback after the music you are listening to is
stopped. If set to <Off>, the last file listened to will play from the beginning.
If set to <On>, the last file listened to will play from the point where last played.
■
<Beep> : Sets the beep sound for button operations to on or off. Select either <On> or <Off>.
■
<Default Vol> : The default volume can be set 00 to 30(Max). If the power is turned on again after
adjusting the volume above the default volume, music is played at default volume.
If the power is turned on again after the volume was set within the default volume, the music is
played at the previously played volume.
■
<Default Set> : Returns all settings to the default value.
√
Page 54
■
<About> : Checks the firmware version, number of stored files, remaining memory.
■
Regarding the Built-In Memory
1GB=1,000,000,000bytes: actual formatted capacity may be less as the internal firmware uses a portion
of the memory.
NOTE
Setting the system
Содержание YP-E3
Страница 1: ...YP E3 ...
Страница 55: ...Chapter 5 Troubleshooting System Reset 56 Troubleshooting 57 ...
Страница 60: ...Chapter 6 Appendix Menu Tree 61 Product Specifications 62 ...
Страница 66: ...REV 0 0 ...