Samsung WISENET BabyView, Руководство пользователя

Страница: 16 / 60

16
· How to Install
Problem Solution
No picture from a
camera
1.
Check all connections to the camera. Make sure the adapter is plugged in.
2.
Make sure that the cameras and monitor are both ON.
3.
Make sure that the camera is in range of the monitor.
4.
Make sure the camera and monitor are paired.
5.
Adjust the monitor antenna to a vertical position.
The picture is or has
become choppy
The picture may become choppy when experiencing a lower frame rate
(i.e. 10 frames per second vs. a higher 20 frames per second).
1.
Try moving the camera closer to the monitor.
2.
Remove obstructions between the monitor and camera.
3.
Adjust the monitor antenna to a vertical position.
No sounds (even with
both units turned on)
1.
Make sure that the power adapter is connected to the camera.
2.
The battery on the monitor may be dead, be sure to charge it using the
adapter included.
3.
The monitor may be out of range from the camera; be sure to check it the
Range LED in on continuously.
Your BrightVIEW is
emitting an high
pitched noise/
feedback.
This sound is normal feedback which occurs if the monitor and camera are too
close together. Move them further apart.
Monitor screen is
frozen.
Restart your monitor and check the connection to the camera. If the baby monitor
displays the "Out of Range" message, move the monitor closer to the camera.
n
`
Low batteries will cause the supply current to become unstable and will affect the quality
of the video/audio. Please charge the battery fully for use for superior video.
t
rouble
s
hootIng
P
roduct
s
PecIfIcatIon
Item Details
System General
Operating Frequency Range 2.4GHz (Wi-Fi), 2.4GHz (FHSS)
Transmitting Power
17dBm(FHSS)/802.11b 11Mbps: 18+/-1dBm 802.11g 54Mbps:
16+/-1dBm 802.11n 135Mbps: 15+/-1dBm (Wi-Fi)
Monitor Sensitivity
-88dBm (FHSS)/135M: -68dBm @10%PER;54M: -74dBm
@10%PER;11M: -89dBm@8%PER (Wi-Fi)
Type of Spread Spectrum TX FHSS , Wi-Fi
Type of Modulation
FHSS (GFSK)/802.11b FHSS(CCK,DQPSK,DBPSK),802.11g/n: OFDM
(BPSK,QPSK,16-QAM,64-QAM)
Data Rate
FHSS (4Mbps), Wi-Fi (802.11b: 11,5.5,5.1Mbps;802.11g:
54,48,36,24,18,12,9,6Mbps;802.11n: 150Mbps Max)
Transmission range
RF Only 900 ft (Line of Site)
*The transmission range of the wireless signal may weaken according
to your environment.
Wireless Camera
Image Sensor Type 1/4” Color CMOS Image Sensor
Effective Pixel H: 1280, V: 1024
Resolution
High : MAX 1.7 Mbps(~10fps@1280x720),
Low : MAX 0.7 Mbps(~10fps@704x480)
Image Compression MPEG4
Max.Framerate 20fps @704x480
Streaming Capability Uni
IP IPv4
Protocol UDP, RTSP, NTP, DHCP, HTTP
Streaming Method Unicast
Max. User Access
4 Users
* The number of available concurrent users for a single camera may
vary depending on the speed of your Wi-Fi router.
SEW-3053W-170117.indd 16 2017/1/17 14:41:20