Samsung WIP-500M, Руководство пользователя

Страница: 46 / 49

53
System Setting
While using a phone registered to a system, you can transfer to another system for
connection. To use this function, the phone should already be registered to the
system.
Refer to the
[1. Registration]
procedure of
[6. System]
for descrip-
tions on how to register a phone.
Encryption Key
You can set the encryption key(WEP key) in the system which should be entered
when you register the phone. You can register the phone to the system only by
additionally setting or clearing the encryption key without having to enter the
system information again.
Registering at the Static IP System
This function enables your phone to register at the system which supports the
static IP mode.
• If you enter nothing and press the [OK] button, the default IP address is
entered.
•
SSID:
Enter the ESSID set on the WBS24, a Wireless LAN access device.
•
User ID:
Enter the ID of a user registered to the system.
• Password
•
Encryption Key:
This is an encryption key for security. Use the 128 bit WEP
key. When the encryption key is set on the system, consult the system admin-
istrator and enter the value set on the system.
52
[MENU] 6. System [OK] 1. Registration [OK]
(Select System to Register) [OK]
2: Static IP Mode [OK] (Select AP Type)
[OK] Enter Phone IP Address [OK] Enter Second WBS IP
Address [OK] Enter System SSID [OK] Enter User ID
[OK] Enter Password [OK] Enter Encryption Key
[OK]
When registering to a system set to Static IP mode, be careful not to
enter an IP address already being used by another phone.
Access Point(AP) is a component of a Wireless LAN that connects
Wire LAN with Wireless LAN APs are usually standalone devices that
can be connected to an Ethernet hub or a server.
You can select either combo or basic as the type of an AP. Inquire
your system administrator for information on the type of AP current-
ly connected to the system.
[MENU] 6. System [OK] 2. System Setting [OK]
(Select System) [OK] Confirm the
Information of the System [OK]
Select [1: System1] or [2: System2]
Inquire your system administrator for information on whether the
system connected to the phone is Sytem1 or System2. To newly reg-
ister a phone to System2, select System2 and register the phone
according to the ‘Phone Registration’ procedure described earlier.
Home Page Table of Contents WIP-5000M Guide