8_
Installing the washing machine
CONNECTING THE WATER SUPPLY HOSE (OPTION)
1.
Remove the adaptor from the water supply hose.
2.
First, using a ‘+’ type screw driver, loosen the four screws on
the adaptor. Next, take the adaptor and turn part(b) following
the arrow until there is a 5mm gap.
3.
Connect adaptor to the water tap by tightening the screws
firmly.
Then, turn part (b) following the arrow and put(a) and (b)
together.
4.
Connect the water supply hose to the adaptor. Pull down
part (c) of the water supply hose.
When you release part (c) the hose automatically connects
to the adaptor making a ‘click’ sound.
5.
Connect the other end of the water supply hose to the
inlet water valve at the top of the washer. Screw the hose
clockwise all the way in.
•
If the water tap has a screw type faucet, connect the water
supply hose to the tap as shown.
After completing connection, if water leaks from the hose, then repeat the same steps. Use
the most conventional type of faucet for water supply. In case the faucet is square or too
big, remove the spacing ring before inserting the faucet into the adaptor.
installing the washing machine
a
b
c
WF7522S9R-02412F_EN.indd 8
2007-02-12 ¿ÀÈÄ 5:20:44
