Removal and Reassembly _ 13
Part
Figure
Description
Separating the Main
PCB
1. Remove the 2 screws holding the ASSY PCB-
MAIN at the back of the washing machine.
2. Separate the 2 Hooks by pushing it rightwards.
3. Remove the 2 screw and 2 Connectors for
separating Guide Wire-T
4. Push the TUB upside to separate ASSY PCB-
MAIN. and separate the ASSY PCB-MAIN lifting it
up.
5. Separate the 3 Hooks.
6. Disconnect All Connectors on main PBA. Lift up
Main PBA, Change SVC Part. After SVC, Certainly
check the all Hooks on COVER-PCB(M) Otherwise
COVER-PCB(M) will be disassembled during
washing machine running.
