12 _ Removal and Reassembly
Part
Figure
Description
Separating the
Cover_Top and
Panel-Control
(Check Sub-PCB)
1. Remove the 2 hexagon screws, which are at the
back, fixing the COVER-TOP.
2. Disassemble the COVER-TOP by sliding it
backwards.
3. Press the Separate button to separate the ASSY
DRAWER.
4. Pull the PANEL-CONTROL towards and then lift it
upwards to separate.
5. Carefully disconnect the two wiring connectors by
hand.
6. Disassemble the ASSY KNOB-ENKODER by
pulling it upwards.
7. Remove the all screws holding the PCB and
release the hooks on both sides to remove the
PCB for repair / replacement.