DEMO MODE -
Press the STEAM SIGNAL PURE CYCLE simultaneously for 5 seconds
Power on state only – must not be in use. Buzzer rings three (3) times “- - - -” is displayed on display other LEDs are off.
Demo mode consists of WASH, SPIN and LED modes.
Press TEMP during Demo mode, “WASH” blinks on the display and the washing machine enters WASH mode.
Press START PAUSE in WASH mode, door is locked and motor rotates left and right at 45 RPM 7 sec on and 3 sec off cycle.
WASH mode continues up to 5 minutes once started. After the 5 minutes have elapsed, “- - - -” is displayed.
Press START PAUSE during a WASH mode, “- - - -” is displayed. DEMO MODE is maintained.
Press SPIN in Demo mode, “Spin” blinks on the 7 segment display and the washing machine enters SPIN mode.
Press START PAUSE in the SPIN mode, the door is locked (Door Lock) and a spin is operated at 1200 RPM.
When the speed reaches 0 RPM, the No Spin, Low, Medium, High, and Extra High LEDs are turned on.
During a spin, the No Spin LED turns on when the speed is lower than 400 RPM.
The Low LED turns on between 400 & 700 RPM. The Medium LED turns on between 700 & 900 RPM & High LED turns on
between 900 & 1100 RPM. Extra High LED turns on at higher than 1100 RPM.
SPIN mode continues up to 4 minutes once started. After 4 minutes have elapsed, “- - - -” is displayed on the display.
Press START PAUSE during a SPIN “- - - -” is displayed on the display. DEMO MODE is maintained.
Press SOIL LEVEL during Demo mode, “LED” is displayed on the display and the washing machine enters LED mode.
Press START PAUSE in LED mode, all LEDs are turned on. The LED mode continues up to 30 seconds once started.
After 30 seconds “- - --” is displayed on the display. DEMO MODE is maintained.
Press START PAUSE during an LED mode operation, “- - - -” is displayed on the display. DEMO MODE is maintained.
