Samsung WF-F1256, Руководство по обслуживанию

Страница: 37 / 69

58
15
DRUM
WASHER
(MODEL
NAME Q1*3*)
a noise Water leakage being occurred
at water supply connection
상담
Lead to reassembe when water supply hose is
departed. Disconnect the water supply hose and reassemble.
16
DRUM
WASHER
(MODEL
NAME Q1*3*)
water leakage
related Water being overflowed from
detergent box(front loading
washing machine) General
consulting It may be used with so much detergent or left
alone for a long time without use.
☞ If the detergent input is impossible insert a proper amount of detergent inot the
detergent box and if it is clogged take out the box forward and clean it.
17
DRUM
WASHER
(MODEL
NAME Q1*3*)
water leakage
related Water bein leaked to floor General
consulting It is a symtom occurred when the hose of bottom
not outside is departed or torn off.
▶ Check the machine for the water drainage route under the machine. If the
water drains through the other side not the drainage side check by the engineers.
18
DRUM
WASHER
(MODEL
NAME :Q1*3*) water leakage
related water being leaked at water
supply connection part General
consulting It may be occurred when it is pushed out due to
the water pressure or it has bad connection.
▶
Disconnect the coupler and reassemble it. It had better to assemble by yourself
because the engineer's visit for service will be additionally charged in case of
difficut installation by customer. In case of the damage or missing of coupler you
can buy i
19
DRUM
WASHER
(MODEL
NAME Q1*3*)
water leakage
related Water leakage being occurred
during water supply General
consulting The leakage during water supply can occur
possibly due to the bad connection of tap and
coupler and water supply hose.
☞ First re-assemble the coupler and then check by the engineer if it continues.
20
DRUM
WASHER
(MODEL
NAME Q1*3*)
water leakage
related Natural
drain(continually)/water not
filling tub General
consulting It can be appeared at the drum washing machine
of which the drain hose is located at the bottom.
▶
For the machine having the drain hose at the below of that raise the drain hose
up and fix it to the fixer at 2/3 point of the machine. If the hose is used at the floor
all water supplied will drain fully.
21
DRUM
WASHER
(MODEL
NAME :Q1*3*) smell/smoke Burning smell General
consulting For the initial use of product It may appear during
the operaiton with coupling each other but it
carefully watched by the customers who are
using more than for 3 years.
▶
Is that a newly bought one?
☞
A smell is disappeared
after 4~5 days passed in case of newly bought one but it depends upon the
frequency of use. Be sure to use it without worry. If is not disappeared contact a
engineer
22
DRUM
WASHER
(MODEL
NAME Q1*3*)
smell/smoke Burning/smoke General
consulting Pull out the plug in case of smoke or fire. It can be shown in case that the interior
components of the products do not work
normally.
☞ In this case you are recommended our engineer's inspection.
23
DRUM
WASHER
(MODEL
NAME :Q1*3*) power soruce
related Power not supplied AS
rerecomm
ended It can be shown in case that the power cord is not
inserted or electricity is blacked out or the interior
components of the products do not work
properly.
☞
Take out the power cord and put it in again and check whether the power for
the other products is on. If it is not even after that you are recommended our
engineer's inspection.
24
DRUM
WASHER
(MODEL
NAME Q1*3*)
power soruce
related Current leakage breaker being
dropped General
consulting It may be occurred when the humidity is full
inside the machine.
☞ In this case you are recommended our engineer's inspection.
25
DRUM
WASHER
(MODEL
NAME Q1*3*)
power soruce
related Autmatic stop during operation AS
rerecomm
ended
It may be occurred when there are too much
laundry.
▶ Reduce the contents to be washed. If it continues you are recommended our
engineer's inspection.
26
DRUM
WASHER
(MODEL
NAME Q1*3*)
power soruce
related Being power off frequently AS
rerecomm
ended It may be occurred in case of the bad contact of
button.
☞
In this case you are recommended our engineer's inspection.
27
DRUM
WASHER
(MODEL
NAME Q1*3*)
operation related Button being not operated Consulting It may be occurred when the accumualtion of
foreign material or moisture ingress into the
button.
☞
In this case you are recommended our engineer's inspection.
28
DRUM
WASHER
(MODEL
NAME :Q1*3*) operation related Being not rotating during
washing
AS
rerecomm
ended It may be occurred when the water supply not
completed or the cover not closed completely or
the accessories of products have a abnormallity.
☞
First check whether the tap is open and the cover closed and then request an
engineer's inspection.