Disassembly and Reassembly _ 19
Part
Figure
Description
Clutch Assembly
(continued)
7. Remove the shaft with the jig wrench.
- Release the nut in a clockwise direction.
- Fasten the nut in a counterclockwise direction.
8. Place the main body so that the front frame
faces upward and remove the 4 bolts holding
the support saddle with a 10mm wrench.
When you place the washer on the floor,
take care that you do not damage or
scratch the product.
9. Remove the bolt holding the DDM motor-
rotor housing with a 17mm wrench and then
remove the motor housing
10. Remove the 5 bolts holding the DDM motor-
stator with a 10mm wrench.
