Disassembly and Reassembly _ 11
3-2. STANDARD DISASSEMBLY DRAWINGS
► This is a standard disassembly diagram and may differ from the actual product.
Use this material as a reference when disassembling and reassembling the product.
Part
Figure
Description
Sub and Main PCB
Assembly
1.
Remove the 5 screws holding the control
panel assembly.
2. Separa
te the assy panel upward with the door
slightly ope
n.
3.
Separate the hass wire from cover connector
and wires connected to the sub PCB.
4.
Pull the knob encoder to separate it and then
remove the 2 fixing screws.
5. Sep
arate wire connected to the touch module
and 4 hooks.
6. Separate hooks and remove 1 screw.
When reassembling the PCB, take care
that you do not damage the control-panel
fixing hook. After replacing the sub PCB,
check the key operation.
6.
Remove the 3 screws and then separate the
cover pcb(m), wires connected to the main PBA.
After reassembling the housing, check
if the wires are properly connected.
When disassembling and reassembling
the housing, take care that you do not
damage the part.
