22 English
Ins
tallation
Installation
B
A
1.
Connect the ends of the water supply
hoses to the
hot (B)
and
cold (A)
faucets.
2.
Tighten the fittings by hand until they
are snug, and then tighten them an
additional two-thirds of a turn with a
wrench.
CAUTION
When you fasten the fittings, do not fasten
them too tightly or apply tape or sealant to
the faucets or water supply intakes. This can
damage the fittings.
NOTE
After you have connected the water supply
hoses to the faucets, ensure that they are
connected correctly by pulling the water
supply hoses downwards.
3.
Place the unconnected ends of the hoses
into a bucket and open the faucets
connected to the two water supply hoses
for 10 or 15 seconds to remove any
foreign substances from the hoses. Close
the faucets before continuing.
WA8700K_WA50K-03647A-01_EN.indd 22
2016/1/13 16:49:54
Содержание WA50K8600A Series
Страница 1: ...Washer User manual WA50K8600A SSEC SEC WA8700K_WA50K 03647A 01_EN indd 1 2016 1 13 16 49 50 ...
Страница 69: ...Memo WA8700K_WA50K 03647A 01_EN indd 69 2016 1 13 16 50 09 ...
Страница 71: ...Lave linge Manuel d utilisation WA50K8600A SSEC SEC WA8700K_WA50K 03647A 01_CFR indd 1 2016 1 13 16 58 31 ...
Страница 141: ...Lavadora Manual del usuario WA50K8600A SSEC SEC WA8700K_WA50K 03647A 01_MES indd 1 2016 1 13 17 05 12 ...