Disassembly and Reassembly _ 11
Part
Figure
Description
Sub and Main PCB
6. Pull and lift up the cover PCB(m).
7. Separate the cover PCB(m) and the wires
connected to the main PBA.
After reassembling the housing, check if
the wires are properly connected. When
disassembling and reassembling the
housing, take care that you do not damage
the part.
8. Pull the PCB (s).
9.
Separate 5 hooks with (–) driver.
Water Valve
1. After separating the control panel, separate the
water-valve housing.
2. Remove the 2 fixing screws.
Guide water
1. Remove the 3 fixing screws.
2. Separate the guide water.
When reassembling the guide water, take
care that you do not damage the guide water
fixing hook.
