1
2
3
Battery
Holder
20
ENGLISH
Preparation
Lithium Battery Installation
Lithium Battery Installation for the Internal Clock
1. Remove the Battery Pack from the rear of the DVD Camcorder.
2. Open the Lithium Battery Cover on the rear of the DVD Camcorder.
3. Position the Lithium Battery in the Lithium Battery Holder, with the
positive (+) terminal face up.
Be careful not to reverse the polarity of the Battery.
4. Close the Lithium Battery Cover.
Installing the Lithium Battery in the Remote Control
1. Turn the battery holder counterclockwise (as indicated with [ ] mark),
using your fingernail or a coin to open it. The battery holder opens.
2. Insert the battery with the positive (+) terminal face down and press it
firmly until you hear locking sound.
3. Place the battery holder to match its [ ] mark with the [
] mark on the
remote control, and turn the battery holder clockwise to fix it.
Precautions regarding the Lithium Battery
1. The Lithium Battery maintains the clock function and preset contents of the memory; even if the Battery Pack or AC Power
adapter is removed.
2. The Lithium Battery for the DVD Camcorder lasts about 6 months under normal operation from time of installation.
3. When the Lithium Battery becomes weak or dead, the date/time indicator will display
00:00 01.JAN.2006
when you set the
Date/Time
to
On
. When this occurs, replace the Lithium Battery with a new one (type CR2025).
4. There is a danger of explosion if Lithium Battery is incorrectly replaced. Replace only with the same or equivalent type.
Warning: Keep the Lithium Battery out of reach of children. Should a battery be swallowed, consult a doctor
immediately.
