ENGLISH
44
44
The Camcorder : Basic Recording
✤
The Zero Memory function works in both REC and PLAY modes.
✤
You can mark a point on a tape that you want to return to following playback.
1. Set the Power switch to
REC
or
PLAY
.
2. Press the
ZERO MEMORY
button on the remote control before the recording or during
playback at the point where you wish to return.
■
The time code is changed to a tape counter that is set to Zero Memory with the
0:00:00
(Zero Memory indicator).
■
If you want to cancel the Zero Memory function, press the
ZERO MEMORY
button again.
3. Finding the zero position.
■
When you have finished playback, fast forward or rewind the tape in stop mode.
The tape stops automatically when it reaches the zero position.
■
When you have finished recording, set the
Power
switch to
PLAY
and press
the
(REW) button.
The tape stops automatically when it reaches the zero position.
4. The tape counter with the
(Zero Memory indicator) disappears from the display and the
tape counter is changed to the time code.
[ Notes ]
■
In the following situations,
Zero Memory
mode may be canceled automatically:
- At the end of the section marked with the
Zero Memory
function.
- When the tape is ejected.
- When you remove the Battery pack or power supply.
■
The
Zero Memory
may not function correctly where there is a break between recordings on the
tape.
Setting the Zero Memory
œ
1
2
Содержание VP-D6550
Страница 156: ...ENGLISH Memo 156 156 ...
