Samsung VP-D10, Инструкция для владельца

Страница: 68 / 84

Playing back a tape
ENGLISH
68
ZERO MEMORY
✤
The MEMORY function works in both CAMERA and PLAYER modes.
✤
You can mark a point on a tape that you want to return to following playback.
1. Press the ZERO MEMORY button on the remote control during playback or recording at the point you want to return to later.
■ The time code is changed to a tape counter that is set to zero memory with the M (Zero memory indicator)
■ If you want to cancel the zero memory function, press the ZERO MEMORY button again.
2. Find the zero position.
■ When you have finished playback, fast forward or rewind the tape.
– The tape stops automatically when it reaches the zero position.
■ When you have finished recording, turn the power switch PLAYER and press the (REW) button.
– The tape stops automatically when it reaches the zero position.
3. The tape counter with the M (Zero memory indicator) disappears from the display and
the tape counter is changed to time code.
Reference
■ In the following situations, the ZERO MEMORY mode may be canceled automatically
– At the end of the section marked with the ZERO MEMORY function.
– When the tape is ejected.
– When you remove the battery pack or power supply.
■ The zero mem may not function correctly where there is a break between recordings on the tape.
■ The ZERO MEMORY will not operate in DV IN mode.
SP STOP
M 0:20:00
33MIN
SP REW
M 0:10:00
43MIN
SP STOP
0:10:00:00
53MIN
00542E VP-D10 UK (~P83) 3/13/03 10:25 AM Page 68