12
Press the SLOW button on the remote control
when the play function is on.
-Voices do not come out when the
SLOW button is pressed
-Slow playing is 1/2 of the normal
playing speed at 1st press.
-Slow playing is 1/4 of the normal
playing speed at 2nd press.
-Slow playing is 1/8 of the normal playing speed at 3rd
press.
-Slow playing is canceled at 4th press.
-The sound is muted during the slow playing.
To return to normal operation
-Press the SELECT(PLAY/PAUSE) button.
SLOW
NTSC/PAL SELECTION METHOD
- Press the PAL/NTSC(REPEAT) button
for 1 sec or longer on STOP Mode.
You can matching the picture display
on your TV.
REPEAT
PAL/NTSC
DISC CHANGE FUNCTION
•
Press the Return(STOP) button.
•
Eject the tray by pressing the Open/Close button.
•
Press the DISC CHANGE button to rotate the tray.
STOP
Disc Change
Open/Close
SELECT
Press the SOUND Selector button
- Every time you press this button, sound changes
as show below
PREPARATION
1. Press the STANDBY/ON button.
(The audio is set to the stereo mode
automatically)
2. Insert a disc and press the PLAY button.
(REMOTE CONTROL)
SOUND
To replace disc during the play
•
Eject the tray by pressing the Open/Close button. It plays
continuously even though the tray is ejected.
•
When the tray is ejected while playing a disc, the tray does
not rotate. Therefore, only up to two discs can be loaded.
To load additional disc
1st press.
2nd press.
3rd press.
Screen on your
TV monitor
L-CH
R-CH
STEREO
L-ch
R-ch
L-signal
L-signal
R-signal
R-signal
L-signal
R-signal
Audio Output
SLOW MOTION
SELECT SOUND TO YOUR PREFERENCE
When playing a CD-R or CD-RW
User-edited CD-Rs (Recordable) and CD-RWs (Rewritable)
can be played back only if they are already “finalized”.
◆
You can play back your original CD-Rs or CD-RWs recorded
in music CD format. (However, they may not be played back
depending on their characteristics or recording conditions.)
◆
Some CD-Rs or CD-RWs may not be played back on this unit
because of their disc characteristics, damage or stain on them,
or if the player’s lens is dirty.
◆
CD-RWs may require a longer readout time. (This is caused
by the fact that the reflectance of CD-RWs is lower than for
regular CDs.)
V320/340/360M 5/8/03 1:19 AM Page 12
