전원램프
충전램프
Under charging
Completion of charging
Installation of r
obotic vacuum
cleaner
installation
18
Observe the following sequence before inserting the power
supply plug of charger.
Remember the installation
method.
● Roughly 120 minutes will be required to have complete charging after the purchasing and around 90 minutes can be operated.
● If charging is performed under the overheated state of battery, charging time can be delayed.
● Measures to be taken when charging in not conducted smoothly.
When automatic charging is impossible, perform the checking of following items.
- Turn on the emergency switch located at the bottom section of main frame after turned it off. (Reset)
- Insert again the power supply plug of the charger. (Reset)
- Confirm whether foreign material is adhered to the terminal section of the charger and wipe the main frame and charging terminal of the
charger with dried dust cloth.
- Confirm whether there aren’t any obstacles such as the object with excellent property of reflection, chair and so forth near to the charger.
● In the case when the robotic vacuum cleaner is being separated from the charger, natural discharge will be started.
- Make the robotic vacuum cleaner to be in the charged state at the charger as much as possible.
(If the house becomes empty for a long period of time due to the business trip, journey and so forth, store the robotic vacuum cleaner after
turned off the emergency switch and pulled off the power supply plug of the charger.)
■
Perform the charging
When purchasing the product, the
battery is in the discharged state,
therefore, it shall manually be charged
at the initial stage.
Turn on the emergency switch located
underneath of the main frame.
1
2
After accurately matching the charging pin of main frame
to the charging terminal of charger, push the main frame
until “piririk” sound is generated from the charger.
▶
Green light will be turned on at the charging lamp.
Confirm the charging state of robot vacuum cleaner.
- When charging is started, “remaining amount of battery”
and “
”are lighted in sequence on the state indication
window.
- When charging is completed, “remaining amount of
battery” and “FULL” are lighted on the state indication
window.
■ When the battery remaining amount indicator
is flickered during the cleaning, suction will
be stopped and automatic charging will be
performed by being moved to the charger.
■ During the automatic cleaning, if “LO” is indicated while the battery remaining
amount indicator is flickering, the cleaner will not be moved even with the
remote controller and main frame button, always perform the charging by
directly carrying the cleaner to the charger. (Remaining amount of battery is
almost in the state of nil.)
<Indication of charging>
Completion
of charging
Under
charging
Charging
is required
Power supply
lamp
Charging
lamp
Power
supply
lamp
Charging
lamp
