6
When suction force of the robotic vacuum cleaner is weakened or trembling
noise is generated, the cleaner may have been blocked by foreign material.
When being blocked by foreign material,
remove it as follows.
Handling of r
obotic vacuum
cleaner
installation
31
After confirming whether foreign material is existed or not,
separate it by pressing the cover fixing hook.
Separate the dust bin by pressing the dust bin
discharging (PUSH) button.
Lift the power brush up from the main frame.
Remove foreign materials such as hair or thread clung to
the power brush with the cleaning brush or vacuum
cleaner.
■
Handling method of power brush
Always turn off the emergency switch at the bottom
of main frame before handling.
2
3
4
● In order to prevent the blocking by foreign material, be careful not to let the cleaner
inhale toothpick, cotton-swabstick and so forth during the cleaning.
● If removing of foreign material is difficult, call to the customer care center
● As the power brush performs the cleaning by sweeping up the dust of the floor,
foreign materials such as thin and long thread, hair and so forth can be wound on it,
therefore, perform the cleaning through regular confirmation.
As the dust on the dust bin can be spilt, separate the
dust bin before handling the power brush.
After insert the upper section of the cover into the groove (3
points), perform the assembling by lowering it downward until
“click” sound is generated.
1
When the handling is over, accurately fix the power
brush in the emergency switch direction, and then,
secure the opposite side with the same method.
5
