URP-SU110 Quick Reference Guide
8
Fig 3. Standby Mode Time Setting
2.2.1 Standby Mode
1. If power is turned on by pressing the power key;
2. If the preset idle time has elapsed;
3. If battery is too low to operate the device.
2.2.2 Resuming from Standby Mode
To resume from Standby Mode, press the [Power Key]. Recharge battery if battery is too low to
operate the device.
2.3 Battery
Standard battery uses 4.2V, 4400mAh Li-Polymer Battery.
If battery life is low, the device automatically shows Low Battery message.
In this case, try to recharge battery as soon as possible.
2.3.1 Checking Battery Life
Run [Power] program on Control Panel and you can check the remaining battery life.
2.3.2 Battery Low
If battery capacity drops under 20%, this means that battery is becoming low. It would be
necessary to recharge battery as soon as possible.
2.3.3 Battery Too Low
If battery capacity drops under 5%, this means that battery is becoming too low and the device
will be turned on in tens of minutes. It would be necessary to recharge battery as soon as
possible.
2.3.4 Placing Main Battery
- Attaching Battery: Move the detach button on the back to right and slowly slide the battery
into its position.
- Detaching Battery: Move the detach button on the back to the left and pull out the
projected handles on either end.
