Quick Reference Guide
17
Menus on Scanner Window
[How to Read Barcode]
1. Bring the scanner closer to read smaller barcodes. This device can read barcode at 40-
300mm distance. If you fail to read a barcode, adjust angle or distance.
2. The laser beam will make a bold red line when it is pointed at the barcode label.
그림
18. 1D Scanner
프로그램
[Incorrect Scanning]
1. The laser beam must go across the barcode.
2. The device cannot read barcode if the laser beam only covers parts of the barcode.
Fig
14. 1D Scanner Program
4.3 UHF 900Mhz (Read / Write)
This program is only applied to Samsung Techwin PDA with the 902.75 ~ 927.25Mhz module.
1D
2D
1D
2D
1. Save: Saves barcode value in a file. (Directory: Flash Disk -> Scanner -> BarCode.txt)
2. Clear: Deletes barcode value, symbol type, symbol ID, number of success, and number of
reading on screen.
3. EPC: Converts barcode value into EPC code.
4. Info: Shows properties of Barcode Scanner.
5. Scan: Shoots beam to read barcode every time you click Scan. (You can also use the key on the
bottom right corner to scan.)
