80
The Schedule Recording/Timeshift Function Isn't Working
When Timeshift or Schedule Recording aren't working, these steps may help resolve the problem.
The problem
Try this!
Schedule Recording
cannot
be used.
Check if there is a USB device connected to the TV.
Recording will automatically stop if the signal becomes too weak. The Timeshift
function will not work if there isn't enough storage space on the USB device.
(HDMI-CEC) Isn't Working
When (HDMI-CEC) isn't working, these steps may help resolve the problem.
The problem
Try this!
does not work.
Confirm that the device is an device. The system supports
devices only.
Check if the power cord of the device is properly connected.
Check the cable connections of the device.
Go to
(HDMI-CEC)
(
Settings
System
Expert Settings
(HDMI-CEC)
) and see if
(HDMI-CEC)
has been set to
On
.
Check whether the TV remote control is in TV mode.
Check whether the remote control is compatible.
may not function when some other functions are active, including
Channel Search, Smart Hub, Plug & Play, etc.
If you have disconnected and then reconnected the HDMI cable, scan for devices
again or turn your TV off and on.
I want to start .
Check if the device is properly connected to the TV, and then select the
(HDMI-CEC)
(
Settings
System
Expert Settings
(HDMI-CEC)
) menu to see if
(HDMI-CEC)
is set to
On
.
I want to exit .
Change the input signal or turn off the connected device.
The message "Connecting
to device..." or
"Disconnecting from
device" appears on
the screen.
You cannot use the remote control when the TV is configuring or
switching to a viewing mode. Use the remote control after the TV has completed
the configuration or has switched to a viewing mode.
The device won't
play.
You cannot use the play function when
Start Setup
is in progress.
