106
How to set up manually
1
Go to the
Network Settings
screen. Select
Start
, press
, and then press
again.
2
The network test screen appears and the verification process starts. Press
Stop
. The verification
process stops.
3
Select
IP Settings
on network connection screen. The
IP Settings
screen appears.
4
Select the field at the top, press
, and then set
IP Settings
to
Enter manually
. Repeat the
entry process for each field in the
1 min.
.
―
Setting
IP Settings
to
Enter manually
automatically changes
DNS Setting
to
Enter manually
.
5
When done, select
OK
at the bottom of the page, and then press
. The network test screen
appears and the verification process starts.
6
When the connection has been verified, the “
Wired network and Internet connection
completed.
” message appears.
Connecting to a Wireless Network
To connect your product to your network wireless, you need a wireless router or modem and a
Samsung Wireless LAN adapter (WIS10ABGN, WIS12ABGNX) , which you connect to your product back
or side panel USB port. See the illustration below.
The LAN Port on the Wall
Wireless IP sharer
(router having DHCP server)
LAN Cable
Product Panel
Samsung Wireles LAN Adapter
Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommerce
sites, and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n
communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a
network connection, the video may not play smoothly.
―
You must use the “Samsung Wireless LAN adapter” (WIS10ABGN, WIS12ABGNX) to use a wireless
network.
The Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and are offered
by select retailers, Ecommerce sites, and Samsungparts.com.
―
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the
wireless IP sharer is currently being used by another device nearby, this will result in interference
and communication failure.
―
Your product supports only the following wireless network security protocols.
If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set
to WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung products will not
support a connection in compliance with new Wi-Fi certification specifications.
―
If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via
PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically
configure the SSID and WPA key in either mode.
―
If your router, modem, or device is not certified, it may not connect to the product via the “Samsung
Wireless LAN adapter”.
―
Ensure the product is turned on before you connect the “Samsung Wireless LAN adapter”.
―
Connection Methods: You can setup the wireless network connection in three ways.
Auto Setup (Using the Auto Network Search function), Manual Setup,
WPS(PBC)
