![background image](http://html.mh-extra.com/html/samsung/ts-h552b/ts-h552b_manual_338750031.webp)
Specifications
Category
SH-W162L(TS-H552L)
DVD±R/RW Drive
DISC
Usable Discs
DVD
: DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-ROM,
DVD-Video, DVD+R (Dual), DVD-R (Dual)
CD
: CD-ROM, CD-R, CD-RW, CD-DA, CD+E(G)
CD-MIDI, CD-TEXT, CD-ROM XA, Mixed Mode CD
CD-I, CD-I Bridge (Photo-CD, Video-CD),
Multisession CD (Photo-CD, CD-EXTRA, Portforio)
Disc Diameter
4.72 Inch or 3.15 Inch (120mm or 80mm)
Interface Support
Interface Port
ATA/ATAPI (E-IDE)
PIO mode
PIO Mode 4: 16.6MB/sec
DMA mode
Ultra DMA Mode 2: 33.3MB/sec
ACCESS TIME (Random)
CD-ROM
110ms (Random)
DVD-ROM
130ms (Random)
Writing
Time
Setting
Titles only TTitles and contents
The entire label area
(including graphics)
Best
Less than 4 min
Less than 9 min
Less than 36 minutes
Normal
Less than 3 min
Less than 7 min
Less than 28 minutes
Draft
Less than 2 min
Less than 4 min
Less than 20 minutes
Data Transfer Speed
(Max)
Media Type
Write
Read
DVD+R
PCAV 16X (21.6MB/sec)
CAV 12X (16.2MB/sec)
DVD+RW
Z-CLV 8X (10.8MB/sec)
CAV 8X (10.8MB/sec)
DVD+R DUAL
Z-CLV 8X (10.8MB/sec)
CAV 8X (10.8MB/sec)
DVD-R DUAL
Z-CLV 4X (5.4MB/sec)
CAV 8X (10.8MB/sec)
DVD-R
PCAV 16X (21.6MB/sec)
CAV 12X (16.2MB/sec)
DVD-RW
Z-CLV 6X (8.1MB/sec)
CAV 8X (10.8MB/sec)
DVD-ROM(Single)
-
CAV 16X (21.6MB/sec)
DVD-ROM(Dual)
-
CAV 8X (10.8MB/sec)
CD-ROM
-
CAV 40X (6.0MB/sec)
CD-R
PCAV 48X (7.2MB/sec)
CAV 40X (6.0MB/sec)
US-RW
PCAV 32X (4.8MB/sec)
CAV 40X (6.0MB/sec)
HS-RW
CLV 10X (1.5MB/sec)
CAV 40X (6.0MB/sec)
CD-RW
CLV 4X (0.6MB/sec)
CAV 40X (6.0MB/sec)
Buffer Memory
2MB
Drive Installation
Horizontal / Vertical
Operating Environment
Temperature
41°F ~ 122°F (5°C ~ 45°C)
Humidity
10% ~ 80% (RH)
Size(Width x Height x Length)
5.34 X 1.65 X 7.24 Inch (148.2 X 42 X 184mm)
Weight
760g
MTBF
125,000 POH(Duty 20%)
Note
Does not support DVD-R for Authoring, DVD-RAM
Cannot playback or record on both sides of a two-sided disc simultaneously.
The read/write capacity of the supported discs depends on the condition of the disc
and the recording format of the drive. Therefore, the read/write quality may not be perfect.
Severe vibration or external impact may decrease the quality of printed images.
Please firmly place the product onto the PC before use.
In case of disk identification error message, thoroughly clean the surface of the disk
where the label is presented and then start printing.
The quality of the printed image cannot be ensured if printing an image on the area
which is already used for printing.
For more information on the writing and duplicating the Lightscribe disk label,
install Nero software and refer to the HELP section.