Call Functions
26
Answering a Call
Dialing a Number
To dial a number using Voice Dial, do the following:
1.
In standby mode, press and hold the
key or the
key.
“
Say a Command
” appears in the display and is pronounced through the
speaker.
2.
Say “
Call
”.
VoiceSignal prompts you to “
Say the name or number
.”
3.
Speak clearly and say the telephone number of the person you want to
call.
For example, say “7 8 1 9 7 0 5 2 0 0."
If it recognizes the number, Voice Dial repeats it and dials the number. If
Voice Dial is not sure it has recognized the number, it displays a choice list
of up to three numbers and prompts you with “
Did you say?
” followed by
the first number on the list.
4.
Say “
Yes
” to confirm the number or “
No
” to hear the next one, or use the
keypad to select the correct number from the list. (See See
“Choice Lists”
on page 91, for more information.)
•
Press the
Repeat
(right) soft key (
or
) to say the name again.
•
Press the
Settings
(left) soft key (
or
), then press the
Exit
right soft
key (
or
) to exit VoiceSignal without dialing.
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains 2-Sec Pause(s) simply wait for the pauses
to pass and the dialing to complete.
•
If you voice dial a contact that contains Wait(s), wait for the appropriate prompt(s)
from the number you are calling (credit card number, bank account number, and
so on) and enter the appropriate response(s).
Answering a Call
Incoming
When you receive a call, the phone displays one of the following:
•
If the caller can be identified, the caller’s number (or name if it’s in your Contacts)
appears in the display.
•
If the caller cannot be identified,
Call from unavailable #
,
Call from restricted #
,
or no number appears in the display.