Caution
Do not let the product drop while moving it.
•
This may result in a problem with the product
or injury.
Do not place the product face down on the floor.
•
This may damage the panel of the product.
When installing the product on a console or shelf,
make sure that the front of the product does not
protrude out of the console or shelf.
•
Otherwise, this may cause the product to fall off
and result in a malfunction or injury.
•
Make sure to use a cabinet or shelf suitable to
the size of the product.
When putting the product down, handle it gently.
•
Otherwise, it may result in a problem with the
product or injury.
If the product is installed in a location where the
operating conditions vary considerably, a serious
quality problem may occur due to the surrounding
environment. In this case, install the product only
after consulting one of our service engineers about
the matter.
•
Places exposed to microscopic dust, chemicals,
too high or low temperature, high humidity,
such as airports or stations where the product is
continuously used for a long time and so on.
Cleaning Related
Since using a surfactant, which contains a large amount of alcohol, solvent or other strong chemicals, may result in the discoloration
or cracking of the product exterior or the panel surface coming off, be sure to use the recommended cleansing agent only.
You can purchase the recommended cleansing agent from a service center.
Before cleaning the product, unplug the power
cord.
•
Otherwise, it may result in electric shock or fire.
When cleaning the product, do not spray water di-
rectly over the product parts.
•
Make sure that water does not enter the product.
•
Otherwise, it may result in fire, electric shock
or a problem with the product.
Caution
Avoid spraying cleansing agent directly onto the
product.
•
This may result in discoloration or cracking of
the exterior of the product or the panel coming
off.
When cleaning the product, disconnect the power
cord and clean the product with a soft dry cloth.
•
Avoid using chemicals such as wax, benzene,
alcohol, thinner, mosquito-repellent, fragrance,
lubrication or cleansing agent when cleaning
the product.
This may result in the exterior being deformed
or the print being removed.
Use a soft, damp cloth with a "monitor-exclusive
cleansing agent" and wipe the product with it.
•
If no monitor-exclusive cleansing agent is
available, dilute a cleansing agent with water at
a ratio of 1:10 before cleaning the product.
Since the exterior of the product is easily scratched,
be sure to use a proper cleansing cloth. Use the
cleansing cloth with a small amount of water. How-
ever, if the cloth is contaminated by alien substan-
ces, it may result in scratches to the exterior;
therefore shake off any alien substances from the
cloth before using it.
