English 17
Français
Español
Deutsch
Italiano
English
Portuguese
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves
energy by switching your monitor into a low-power mode when it has not been used for a
certain amount of time. The available modes are “On”, “Standby”, “Sleep”, and “Deep
Sleep”.
PowerSaver operates with a VESA DPMS compliant video card installed in your computer.
You use a software utility installed on your computer to set up this feature. See Table 2
below for details.
Table 2. Power-saving modes
NOTE:
This monitor automatically returns to normal operation when horizontal and vertical
sync return. This occurs when you move the computer’s mouse or press a key on the
keyboard.
This monitor is EPA E
NERGY
S
TAR
®
compliant and NUTEK compliant when used with a
computer equipped with VESA DPMS functionality.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
State
Normal
Operation
Power-Saving Function mode (EPA/NUTEK)
Standby Mode
Sleep Mode
Position A1
Deep Sleep Mode
Position A2
Horizontal Sync
Vertical Sync
Video
Active
Active
Active
Inactive
Active
Blanked
Active
Inactive
Blanked
Inactive
Inactive
Blanked
Power
Indicator
Green
Amber
Amber
Blinking
(0.5 sec. interval)
Amber
Blinking
(1 sec. interval)
Power
Consumption
42 W (Max.)
40 W (Nom.)
Less than 5 W
Less than 5 W
Less than 5 W
Appendix
3 S/M 870/770/170 (E) body.FM Page 17 Wednesday, December 20, 2000 2:00 PM
